Contact

Sepro travels around the world to meet customers and to give them the opportunity to discover upcoming Sepro innovations.

From October 16th to 20th, Fakuma, the international plastics trade fair will be held in Friedrichshafen, Germany. Sepro will show a total of eight robots on its booth Hall A1-1203. This year Sepro will be represented on a dozen stands of leading injection molding machine manufacturers.

The Success 5, Success 7 and Success 11 will be in action with an S5 Picker, which responds to the same 3-axis mechanical design as the Success robots. On our booth, Sepro will show for the first time three operating presses made available by two of its partners: Sumitomo Demag, and Haitian. The Haitian press will be equipped with a Sepro 5X-15 robot and the Sumitomo Demag presses with an SDR 5S (Success 5 under the Sumitomo Demag label) and S5 25 speed (SDR-labeled as well). Finally Sepro will exhibit its new concept: The Seprobot – Easy100.

Experience full control at Fakuma 2018


SEPTEMBER

  • KUNSTSTOFFEN – NETHERLANDS

On September 26th and 27th, Sepro was at the Kunststoffen trade fair at Veldhoven in the Netherlands. During this trade fair, Sepro showed their S5-15 speed and 6X60 part of the Sepro-Stäubli 6X visual range on booth 132.


OCTOBER

  • MSV – CZECH REPUBLIC

From the 1st till 5th October at Brno, Czech republic, Sepro was represented on our distributor KUBOUŠEK s.r.o. booth G1/034.  A 5X25 and a Sepro-Yaskawa 6X205 were on displayand two robots were also exposed on Mapro’s booth and on our partner’s Haitian booth.

  • FAKUMA – GERMANY

Experience Full Control with Sepro at Fakuma 2018 from 16th – 20th October.


NOVEMBER

  • CHEMPLAST –SPAIN

Sepro is a partner of this trade fair and will be present from the 5th till 8th November at IFEMA-Feria de Madrid at the booth E 509. During this event, Sepro will be presenting three robots:  S5 Picker, a Success 5 and a Seprobot.

  • EXPO PLASTICOS  – MEXICO

In Mexico from the 7th till 9 November, Sepro will be at the Expo Plasticos trade fair thanks to their distributor Axiomatek at  booth 413. Here you will be able to discover a S7 55 which will be on show.

  • EXPOPLAST – CANADA

Visit Sepro Canada at the booth 801, November 14-15, at the Palais des Congrès in Montreal at the only show in Quebec dedicated exclusively to plastics. An S5 Picker and an application featuring a Success 11 and a robot of the 6X visual range will be on show.


DECEMBER

  • PLASTEURASIA – TURKEY

Find Sepro from December 5th to 8th at Plasteurasia. The Success 11 and 5X25 robots will be on show on the booth of our Tepro distributor, Hall 2 – Booth 209-213.